Intelligent sensor switch, LED body close sensor switch, sensor switch manufacturers of microwave links in Shenzhen, Shenzhen Teng on Intelligent Technology Co., Ltd.. 
 1 Introduction 
 Intelligent sensor switch, LED sensor switch close to the body, Microwave sensor switch TRIS-80CW03 is controlled according to the Doppler effect, which uses high-performance microwave modules and ASIC. Sensing in the microwave range, if the detection of human activity, trigger sensor switch automatically, control the load on or off. TRIS-80CW03 built-in light sensor, Microwave sensor switch can be adjusted in different degrees of light work. As a result of micro- 
 Wave sensing method, TRIS-80CW03 penetrate plastic housings, doors, glass, and other non-metallic wall, ideal for home, office area, 
 Hotels, corridors, parking lots and other places of lighting control. 

 2 Main parameters of the smart sensor switch 
 Induction principle: Microwave Doppler 
 Operating voltage: AC220V / 50 Hz 
 Rated Power: 400W 
 Transmit Power: 5.8G 
 Power consumption: <2mW 
 Detection angle: 360 °, adjustable 
 Detection range: 10cm-5 meters (radius) 
 Delay time: 2 seconds -5 minutes 
 Installation height: 3.5 m Max 
 Work illumination: 2-30LUX 
 Operating temperature: -10 ℃ --- +60 ℃ 

 3 Features 
 Microwave sensing means to penetrate non-metallic objects, can be completely concealed inside the lamp is installed on; sensing distance adjustable: DISTANCE knob clockwise to the maximum, the sensing distance of up to 5 meters, DISTANCE transferred to the knob counter-clockwise hour sensing distance of about 10cm. Adjustable delay work: TIME knob clockwise to the maximum, the work delay of 25 minutes, TIME knob counterclockwise transferred to the most hours of work time delay of 5 seconds. Adjustable illumination of work: LUX knob clockwise to the maximum, it can work in any illumination, LUX knob counterclockwise transferred to the most hours, the only illumination in the less than 3LUX work.